 |
|
|
|
|
|
|
|
DOWNLOAD THE BROCHURE
|
|
|
|
|
All our brochures and datasheets are available on www.myoros.com.
If you are already a myOROS user, click here to download the brochure.
If you are not, you should first register filling in a short form to be able to access this restricted area.
myOROS will also give you the opportunity to download demo software and literature related to Noise and Vibration for free.
|
|
|
|
 |
|
|
|
|
- High precision and very low noise frequency response function determination
- High frequency resolution: continuous sweep up to 80 000 points
- Pure tone excitation
- Frequency range from 0.01 Hz to 40 kHz, in 1 to 8 independent spans
- Automatic control of the generator output level to get constant level either at input or output system under test
- User defined level/frequency template
- Boosted mode to speed up the measurement
- Display Frequency Response, Coherence, Spectrum
- Bode and Nyquist plots
- Export to Excel, Matlab and others
|
|
|
|
|
|
|
|
Advanced Swept Sine is a measuring instrument that allows to determine Transfer Function or Frequency Response Function that are commonly used in various industries for Servo control, Structure, Acoustics, Electronics or Accelerometers calibration.
|
|
|
The challenges for determining the Frequency Response are the frequency resolution, an excitation level control (control of the energy transferred to the system, enough for getting a good signal/noise ratio, but not too much for avoiding non-linear phenomena) and speed of the measurement.
A2S gives the most adapted answer to these requests, and compared to the standard functions included in a FFT analyzer, A2S dramatically overpasses the capabilities of a random or swept sine excitation coupled with a peak hold FFT.
|
back to top
|
|
| |
|
|
