- Home >
- Instruments >
- Autonomous Monitoring
Temporary Vibration Monitoring of Rotating Machinery: SysTeo
Overview
SysTeo, with its recording and analysis capabilities, is a dedicated tool for the temporary vibration monitoring of rotating machinery. Its user friendly interface allows to install the system on the machinery in a dedicated configuration in a minimum amount of time. Embedded in the OROS SmartRouter (the controller unit), which has been designed to stand in for the expert on site, SysTeo becomes an autonomous monitoring system remotely from your office.
Main Features
- Transient event detection management: level, threshold, mask
- Vibration record and analysis with NVGate availability
- Condition monitoring
- Hard disk space optimization during monitoring
- Dynamic channels, DC channels, Digital Inputs/Outputs, tachometers follow-up
- Email for event notification
- Power cut and restart management
Safe mobilityThe Satellite configuration is a complete mobile system. Installed on a machinery, its autonomy is assured by the power supply and the power cut management. Not only autonomous on the field, it is also totally remote controlled and provides information on the monitoring status. For each detection (change of state, over threshold…), an email is sent. |  |
 | Condition monitoringWhen monitoring is started, SysTeo controls the analyzer and configures the parameters to be monitored. Several monitoring conditions can be defined: starting date, threshold on rotation speed or DC channels, digital input status. SysTeo looks on these parameters and starts the monitoring when all the conditions are met. With the same logic, the monitoring is interrupted if one of the conditions is not longer fulfilled. |
Optimized data collectionSysTeo allows continuous monitoring without overloading the memory disk. In this goal, monitored parameters (spectral, scalar or logic data) are recorded with a defined periodicity. These statistical data are saved and so follow forever the monitoring through. Added to these results, spectra and time domain signal are recorded for each event detection. All these results are stored in order to be directly available for their post analysis and so insure a continuous monitoring. | |
|
| Detection managementSysTeo manages several types of events which can be detected during monitoring: Mask comparison or overall level on dynamic channels, threshold on DC channels, status of digital inputs, threshold on the rotating speed. The detections are saved and activate a time domain signal record as well as digital inputs to launch specific actions. (luminous or sound signal). |
Analysis toolsThe monitored data can be visualized and consulted on-line. At the end of monitoring a monitoring report is displayed with an access to all the saved results. A data extraction of a specific period can be done in order to post-analyze it with NVGate. | |
Dedicated to your Demanding World
|
|
|
