Answering the global economy, ship transportation is continuously growing, and the military demand for silent and powerful warships is continuous. The shipbuilding industry has more and more demand for larger and faster ships.
The latest propulsion innovations (Pods, turbine powered) as well as the building technologies need more measurements to be qualified and validated. Classical recorders or basic analysis systems cannot meet such demanding acquisitions and analyses. OROS helps you facing such vibration analysis challenges.
On reciprocating machinery the cause of vibrations often comes from the non-linearity of the angular speed.
Thanks to the integrated frequency to RPM converter, the OROS analyzers provide the instantaneous angular speed inside each shaft revolution.
The analysis of this speed in frequency or time domain give helpful information for vibrations reduction during prototyping or for source identification while doing service diagnostics.
With torsional analysis, detect, follow the torsional resonance of the shaft and, for example, identify problems due to flexible coupling.
Damaged roller bearings are common vibration sources. Their vibration spectrum, measured with an accelerometer mounted on the casing, allows you to determine mechanical failures on balls or races. Envelope demodulation and kinematics markers, part FFT-Diag module, are the key tools for that purpos.
Gearboxes is a very critical part of transmission and has specific vibration signature requiring correlation or cepstrum analysis for an accurate diagnostics:
Reciprocating machines are complex installations. They generate specific vibration signatures. The objective is their performance optimization and faults detections. For example, injection delay, valves faults, segmentation wear can be identified with EngineDiag.
This software module integrates the machine mechanical properties: number of cylinders, firing order and timing diagram, allowing to provide pertinent decision criteria on the field. Time signal, overall levels as well as angle-frequency representationon the machine cycle are efficient results for diagnostics.
A powerful analysis to solve problems related to forced vibrations. Only with few measurement points, determine the source of high vibration level and the structural modifications to be implemented on the machine.
Absorbing and damping mounts are the components through which the vibration energy is transmitted between the engine and the rest of the ship: their properties, dimensions and positions should be determined with care. The techniques used are cross spectrum, transfer functions, damping, as well as ODS (Operating Deflection Shape)
Modal Analysis is one of the key steps when testing machines: it determines their structural characteristics and so, defines how they reacts to operating excitations. Shaker or impact hammer excitations can be used to capture the experimental datasets: the final stage is the actual OROS modal analysis.
This technique uses acoustics tools, typically 1/3 octave analysis. The results allow to identify and reduce the transmission to StructureBorne Noise.
Identify defaults of the engine operation (injection pump malfunction, wear of the injectors, burn out of the valves) with the accurate waterfall.
It displays in function of time and frequency acceleration information from the top engine. Defaults can be detected with the intuitive exploration tools.