icone Menu mobile

Oros Oros

You are here :
Votre barre d'outils Reduce font sizeIncrease font sizeIncrease contrast inverting colorsThe current format is the default one Send this page to friend

2015 (archive)

Test and Measurement Day 2015

December 2, Aix-en-Provence, France 


The whole noise and vibration community gathers and networks at Test and Measurement days, organized by the Federation of Measurement's Instrumentation, Test and Energy Conversion in the field of electronics. As part of this community, OROS will be at this event and demonstrate its wide range of analyzers and software solutions. SIMTEC webiste

November 2015 >> Space Tech Expo Europe

17-19 November, Bremen, Germany


Space Tech Expo & Conference Europe brings together leading engineers, executive management and global decision makers in commercial, government and military space. Strategically positioned in Central Europe, Bremen is a city of aerospace excellence. Space Tech Expo Europe becomes the continent’s major dedicated supply-chain and engineering event for spacecraft, launch vehicles, subsystems and space-qualified components.

 

Come and meet us at booth #E43

October 2015 >> 12th International Exhibition of Testing and Measuring Equipment Testing & Control  

October 27-29, Moscow, Russia

 

Testing & Control 2015 will present a wide range of testing, controlling and measuring equipment for the aviation, aerospace, machine building, metallurgy, construction, electronic, oil and gas, energetics, and other industries.
OROS will display its latest Teamwork Instruments technology on booth of its partner TSTech.

Visitors have the opportunity to choose from

  • Equipment for climatic tests
  • Equipment for mechanical tests
  • Equipment for non-destructive testing
  • Metrological equipment
  • Equipment for manufacturing monitoring
  • Industrial diagnostics equipment
  • Equipment for laboratory testing

October 2015 >> Surveillance 8 - International Conference  

October 20-21, Roanne, France


This international conference will address recent advance in acoustical and vibration methods development and applications for surveillance and diagnostics in the following areas:

  • 1. Machines
  • 2. Vibrations & Acoustics
  • 3. Numerical Modelling
  • 4. Measurement and Testing Techniques
  • 5. Signal Processing, Model Identification
  • 6. Diagnosis Techniques
  • 7. Surveillance Techniques
  • 8. Predictive Maintenance, Condition Monitoring and Prognosis
  • 9. Industrial Applications and Case Studies

Test and Measurement Day 2015

October 6, Lille, France 


The whole noise and vibration community gathers and networks at Test and Measurement days, organized by the Federation of Measurement's Instrumentation, Test and Energy Conversion in the field of electronics. As part of this community, OROS will be at this event and demonstrate its wide range of analyzers and software solutions. SIMTEC webiste

Sept 2015 >> Automotive Testing Expo 2015

September 15 - 17, 2015, 
The SHANGHAI everbright convention & exhibition center, China.


TS-Tech
, our local representative in China specialized in the Ground Transportation market, will preview OROS latest technology on this famous Exhibition of very high level quality product. 
The OROS analyzers' and specific solutions made for the field will be presented at TS-TECH Vibration analysis Booth, in association with OROS China, our office in Beijing.
More information about Automotive Testing Expo 2015

September 2015 >> Turbomachinery Symposium

September 14-17, Houston, Texas, USA

Built on a history of success, the Pump/Turbo Symposia is an event you can’t afford to miss. This annual event features a world-class technical program combined with an international exhibition complete with full-size equipment and hundreds of leading companies.

 

These two events are led by engineers with vast experience in the petrochemical, process, chemical, utility, contractor, and consulting fields, along with manufacturers of rotating equipment and fluid-handling equipment from around the world.

Both symposia feature lectures, tutorials, case studies, discussion groups, and short courses, as well as exhibits of the latest services and full-sized equipment. These international meetings emphasize the technology and troubleshooting that users need in today's challenging workplace.

 

Come and meet us at booth #3023

August 2015 >> International Congress and Exposition on Noise Control Engineering

August 9-12, San Francisco, California, US

 

INTER-NOISE 2015, the 44th International Congress and Exposition on Noise Control Engineering, will be held in San Francisco, California, United States of America, 9 -12 August 2015. The Congress is sponsored by the International Institute of Noise Control Engineering (I-INCE), and is being organized by the Institute of Noise Control Engineering of the United States of America (INCE/USA) and in cooperation with the Korean Society of Noise and Vibration Engineering (KSNVE).

In addition, joint meetings with the ASME Noise Control Acoustics Division (NCAD) and the TRB Noise & Vibration Committee ADC 40 summer meeting which will overlap the Congress Tuesday through Thursday.

 

Come and meet us at booth #213

é

June 2015 >> SAE Noise & Vibration Conference and Exhibition 

June 22-25,  Grand Rapids, Michigan, US


The SAE 2015 Noise and Vibration Conference and Exhibition is the premier technical event dedicated mobility noise, vibration and harshness. Held biennially, this conference serves as a forum for leading automotive, commercial vehicle, and aerospace professionals to share the latest technologies surrounding NVH, and sound quality. The following topics related to vehicle design, engineering and testing will be the focus of the event:

 

  • Engine/Powertrain/Drivetrain
  • Heavy Vehicle and Vehicle Exterior
  • Numerical Methods
  • NVH Measurement
  • Passive and Active NVH Control
  • Standards, Process and Perspectives
  • Vehicle Subsystem NVH
  • Commercial and Specialty Vehicles

 

Come and meet OROS at booth #419

June 2015 >> Automotive Testing Expo Europe 2015

June 2015 16-18, Messe Stuttgart, Germany


Messe Stuttgart was the venue for another highly successful Automotive Testing Expo Europe in June 2014. Exhibitors and visitors alike praised the event, which showed once again why it is the leading event dedicated to the quality, safety, reliability and durability of vehicles.

 

Come and meet OROS at booth #1934

June 2015 >> ASME Turbo Expo

June 15-19, Montréal, Canada

As a major player in the rotating equipment and power generation communityOROS instruments provide all the tools for rotating analysis, from acceptance tests to diagnostics.

 

Click to know more on ASME Turbo Expo 2015. Come and meet us at booth #317

May 2015 >> NexTurbine, a Turbine and Gas Power Event

21-22 May 2015 in Shanghai, China

 

OROS is a global manufacturer and solution provider of noise and vibration measurement systems: Instruments, Software and Services. Designing and manufacturing rugged and real-time noise and vibration analyzers with efficient software solutions, OROS is a leader in rotating analysis.
Whatever the machine under test, gas and steam turbines, generators, hydro turbines, wind mills, fans and blowers, OROS provides all the vibration tools from acceptance tests to diagnostics.

  • Rotor vibration measurements is enabled by the turbomachinery vibration solution featuring orbit, shaft centerline, spectra, bode and polar plots among others.
  • Roller bearings diagnostics can be achieved with our FFT-Diagnostics tool using in particular envelope demodulation.
  • Balancing rigid and flexible rotors: Shop balancing is achieved with the single/dual plane module for rotors operating in their rigid body region. For rotors operating in their flexible region, the multiplane module should preferably be used.
  • Torsion can also be investigated using OROS dedicated tools to measure and analyze rotating speed fluctuations (acyclism) and torque.

OROS also provides tools for Structural Dynamics, especially ODS (Operating Deflection Shape) and end winding bump testing on generators. ODS is an important analysis procedure used to locate machinery and piping system deflection during operation.
The OROS noise and vibration analyzers are made to work in rough environments. They are especially designed for field testing, such as on-site commissioning, machinery startup, installation vibration signatures, diagnostics and troubleshooting.
Improve efficiency, maximize uptime and minimize costs visiting us on our booth.

This conference and exhibition are organized by Asia Carbon Energy. All the Gas Turbine leaders will be part of this event. Our Turbomachinery expert at OROS will go to Shanghai to take part to this Turbine and Gas Power event.


Visit the NexTurbine website to get more information.

May 2015 >> Measurement Fair SENSOR+TEST 2015

May 19-22, Nürnberg, Germany



From Sensors to Evaluation: a Comprehensive Overview of System Expertise for Measuring, Testing, and Monitoring Tasks in all Industries

 

Come and meet us at booth 11-436, Hall 11

Test and Measurement Day 2015

May 19, Paris, France  


The whole noise and vibration community gathers and networks at Test and Measurement days, organized by the Federation of Measurement's Instrumentation, Test and Energy Conversion in the field of electronics. As part of this community, OROS will be at this event and demonstrate its wide range of analyzers and software solutions. SIMTEC webiste

April 2015 >> International Conference on Fan Noise, Technology and Numerical Methods

April 15-17, 2015, Lyon, France

FAN 2015 includes 3 days of technical presentations, keynotes, an exhibition, social networking events and panel sessions. If you are involved in the Fan industry, this is a must attend event.

 

Come and meet us at booth #16 Read more about Fan Noise

Test and Measurement Day 2015

April 9, Grenoble, France 


The whole noise and vibration community gathers and networks at Test and Measurement days, organized by the Federation of Measurement's Instrumentation, Test and Energy Conversion in the field of electronics. As part of this community, OROS will be at this event and demonstrate its wide range of analyzers and software solutions. SIMTEC webiste.

International Oil & Gas Products and Services Suppliers Trade Show



3-6 March, 2015, Hilton Hotel Alger, Algeria

 

 

An international trade fair for four days on the esplanade of the Hilton Hotel, Algiers. Devoted to product and service providers related to the oil and gas activity in Algeria.

This show will be a comprehensive showcase of the diverse range of products and services to meet the needs of operators activating in this sector. It is a platform for communication and linking OF BUSINESS, between oil and their suppliers.

A meeting betw

 

een oil and suppliers associated with conferences with debates on themes Previous News, in the animated national and international expert confirmed.

 

Come and meet our partner RESPUR (AIS) at booth #C31Know more about the exhibition

Webinar "Easy Bump Tests with NVGate V9.00"


19 & 24 February

 


Discover the best practices for your bump and impact tests with the 2015 release of the OROS analyzer software: NVGate V9.00 gathers efficient, ergonomics and clear functionalities that make such operations fast and simple.  
If you are adjusting blades, checking  end-winding resonances, establishing in-line manufacturing quality, acquiring FRFs for Modal analysis, register to learn and improve your efficiency.

FREE REGISTRATION, 2 dates, several times

February 2015 >> OROS at IMAC XXXIII A Conference and Exposition on Structural Dynamics

February 2-5, 2015, Rosen Plaza Hotel, Orlando, Florida, USA

 

As part of the international Structural Dynamics community, OROS will participate as usual in this yearly event.

IMAC XXXIII at a glance:

  • Basics of Modal Analysis for the New/Young Engineer
  • Substructuring Sessions
  • Nonlinear Sessions
  • Civil Structures Sessions
  • Model Validation and Uncertainty Quantification Sessions
  • Sensors and Instrumentation Sessions
  • Other Technical Highlights

 

IMAC is organized by the Society of Experimental Mechanics (SEM). Visit the SEM website to know more on the event.

 

Come and meet us at booth #310

Test and Measurement Day 2015


January 27, Toulouse, France 


The whole noise and vibration community gathers and networks at Test and Measurement days, organized by the Federation of Measurement's Instrumentation, Test and Energy Conversion in the field of electronics. As part of this community, OROS will be at this event and demonstrate its wide range of analyzers and software solutions. SIMTEC webiste.

January 2015 >> Technical Mornings: "Modal Analysis, Structural analysis tool"


January 21th & 22th, Toulouse, France


Modal analysis is an effective technique for understanding the dynamic behavior of a structure.

It allows to extract features such as resonant frequencies, depreciation, mode shapes. Although these data are used mainly in R & D in the design (model validation, design optimization ...) they are also useful for fault detection during maintenance or for acceptance tests.

After presenting the different methods of modal analysis (ODS, EMA, OMA), OROS offers to address a specific example of a rotating machine with a comparison between ODS and EMA, and eventually we will analyze the results.

Read the planning & register (Free, speech in French)

Contact us Press Jobs Press Legal Notices Sitemap Group
google plus Youtube Twitter